Methods of Installing Attic Fans
It often becomes hooter in some parts of the year. Such conditions call for the need of attic fans. A lot of cooling to the homes is brought about by the attic fans. Usually homeowners may call for specialists to install the attic fan for them. However this may be costly as there are other easier ways to install. In other situations you may be able to install the fans on your own without getting any help. You can get a lot of money that you would rather have spent on the specialists. This article looks at some of the easiest ways to install the attic fans.
You may need to inspect the vents. You can choose a hot day and measure the temperatures using a thermometer. This will help in knowing whether your fan gets enough ventilation. Deciding on the types of a fan to install is also necessary. There are two different types of attic fans. The types include the roof fans and gable fans.
The first step to installing an attic fan is to measure. The measurements will give you the best size of the fan that you wish to mount. The calculations often follow the measurements. The ratings of the fan come in cubic feet of the air moved per minute. You can know the fan that you need by squaring the feet that’s you get. 0.7 is used to multiply the answer that is received after squaring. You will get from the multiplication the CFM of the fan.
The second way to install an attic fan is to remove the old shutter. If the fan is bigger than the vent then you need to do away with the vent. The fans are again placed above the hole of the older vent. Measurements are needed in this case. The measurement should be the ones that can accommodate the new fan. Then you can cut leaving enough space for the fan to be installed. You also need to make sure that there are no vent framing when cutting.
The third way to install an attic fan is to mount the fan. You will need a piece of plywood to mount the fan. The plywood should be fitted around the framing that surround the hole made. The plywood is fastened on the wall to help to make the hole be on the center of the vent hole. You can cut a hole with a jigsaw. The fan can be made safer by using screws. The fan should be placed the right side up.
In summary, it very easy to install an attic fan
Supporting reference: Full Article